![](https://drh6hn78z759f.cloudfront.net/userfiles/leadpage/honeywell/eyewash/fendall-pureflow-1000.jpg)
Q&A: Emergency Eyewash Stations
The protection of workers’ eyesight is of utmost importance. For that reason, it is strongly recommended to install safety products such as eyewash stations near any activity requiring the use of hazardous materials or in very dusty workspaces.
Here are a few important details which will make you a matter expert.
Why use eyewash stations?
A hazardous material coming into contact with the eye can cause severe injuries. The first minutes are crucial. The eyewash station allows to flush out and decontaminate the eye directly on the site, near the workstation, thus reducing the risks of injuries or complications.
Where is the ideal spot?
The protective equipment must be installed as closely as possible to the risk. The American National Standards Institute (ANSI) recommends installing the protective equipment so every worker can access it within 10 seconds of the accident. Therefore, it must be installed 15 meters from the workstation or any harmful products.
Also, install signage to indicate the location of the eyewash station. The zone must be clutter-free and well-lit.
What criteria must be taken into consideration?
Eyewash stations must dispense the liquid to both eyes simultaneously. The user must be able to open their eyelids using their hands to remain in contact with the liquid. The station must be installed between 33 and 53 inches from the ground and have a flow rate of at least 1.5 liters per minute for a minimum of 15 minutes.
Finally, the device must be designed to be easily operated within one second and continue to flow automatically without the user needing to use the activation button.
What is the ideal water temperature?
When in contact with a chemical product, the eyes must be flushed for 15 minutes. The water must be at the right temperature to avoid complications. The ANSI recommends tepid water, between 16 and 38°C (60 and 100°F).
Water too hot may further the chemical reaction or cause complications, and water too cold can cause hypothermia.
Temperature and flow control faucets will ensure treatment stability and the affected worker’s comfort.
What about maintenance?
The ANSI recommends activating an eyewash station connected to sanitary facilities at least once a week. For portable eyewash stations, as the rinsing liquid is in limited quantity, it is essential to verify the level regularly to ensure it is filled at all times.
Products to ensure the safety of your workers
Honeywell proposes eyewash stations as well as related safety equipment. At SPI, find everything you need to ensure your workers’ safety.