Fall Protection Equipment: Essential Maintenance and Care
You probably deal with a whole lot of dust, industrial solvents, built-up salt from sweat, and oils on the job, and these can have a direct impact on the longevity of your fall protection equipment. Unfortunately, there’s no way around dirt.
This is why basic maintenance and care of your equipment is essential to extend the life durability of the product and will contribute toward the performance of its crucial safety function. We suggest following the manufacturer's cleaning instructions for the equipment.
How do I clean my fall protection equipment?
- Wipe dirty surfaces with a damp sponge using clean water.
- Clean with a foam made from mild soap or a non-abrasive detergent.
- Rinse the straps with clean water.
- Air dry, away from direct heat sources and sunlight.
- Store the equipment in a clean, dry place, out of direct light in a way that does not warp or distort the belt.
Deep Cleaning:
- Use only non-corrosive and non-abrasive cleaning solutions.
- Place the equipment in a mesh laundry bag to prevent tears and abrasion.
- Clean in a clean sink or bucket with a small amount of soapy solution. (Too much soap or solution can make your equipment sticky or uncomfortable to wear.)
- Rinse thoroughly, then hang to air dry away from sunlight, steam, and excessive heat.
- Inspect your PPE.
Can I machine wash my harness?
No. Machine washing can reduce the longevity of your equipment, can soften the webbing, or cause fading.
The don’ts of cleaning your fall protection equipment
- Do not soak your PPE as that can damage some materials.
- Never machine dry your PPE or store it wet.
- Never use bleach or an acid solvent on your PPE since these can cause serious damage.
Do you have any questions about your fall protection equipment? Contact one of our experts!
Fall Protection Equipment Storage
Do you leave your harness or equipment in your car?
There’s a strong chance that your equipment won’t be able to fulfill its number one task: protect you if your current storage system involves leaving it overnight to freeze and thaw in the morning, if it is exposed to the harsh sun rays, or if it’s subjected to cuts from other tools.
When not in use, your fall protection equipment needs to be kept in a cool, dry, and clean place, ideally out of direct sunlight. Make sure to avoid any areas where heat, light, oil, moistures, vapors, or chemicals are present.
Heat, cold, and constant exposure to sunlight may lead to invisible damages.
Damaged equipment or in need of maintenance should not be stored in the same area as functional equipment.
Harnesses should be hung up to avoid any physical damage such as sharp objects slicing them.
